PL123-09HOC-R

PL123-09HOC-R Overview

Clock ICs are packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. As a result, frequency synthesizers can be found to contain 16 terminations. To operate this time clock generator, 3.3V voltage should be applied. It is designed that the Clock PLL's input should be Clock. To access the electronic component's full performance, 1 circuits are implemented. Providing a maximum frequency of 134MHz, this clock-based RF synthesizer is suitable for a variety of applications. With the Surface Mount, it is easy to install this electric component on the panel. It would be possible to supply this clock PLL with 3.6V of power. It is safe to use this frequency synthesizer with a supply voltage above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. According to the base part number PL123, its related parts can be found. This clock generator offers low timing skew at 0.25 ns Max. Analog clock generator is configured with 9 pins that enable the high true output.

PL123-09HOC-R Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
9 true outputs

PL123-09HOC-R Applications

There are a lot of Microchip Technology PL123-09HOC-R Clock Generators applications.

• Simple clock clean-up circuits
• FM demodulation networks for FM operations
• Multiplexing communication
• FPGA and processor clocks
• Ultrasound diagnosis
• CB radios
• Frequency shifting decodes
• Instrument
• Notebooks
• Bit synchronization