Products
Manufacturer
RFQ
NEWS
ContactOPA703NA/250
1 Channels 10mA per Channel 1pA 70 dB Instrumentational OP Amps 6V 4V~12V ±2V~6V OPA703 5 Pins SC-74A, SOT-753
- Manufacturer: Texas Instruments
- NO: 815-OPA703NA/250
- Package: SC-74A, SOT-753
- Datasheet:
- Stock: 3278
- Description: 1 Channels 10mA per Channel 1pA 70 dB Instrumentational OP Amps 6V 4V~12V ±2V~6V OPA703 5 Pins SC-74A, SOT-753(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Operating Supply Voltage | 6V |
| Number of Channels | 1 |
| Operating Supply Current | 160μA |
| Nominal Supply Current | 200μA |
| Output Current | 10mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 4V~12V ±2V~6V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 93.98dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 160μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 750μV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA703 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
OPA703NA/250 Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. A total of 5 terminations have been reported in the past few weeks. A total of 5 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 750μV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using a supply current of 160μA , this buffer op amp will be able to operate. You should keep the voltage gain at 120dB for the time being. Instrumentation amplifier has 1 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 6V. The instrumentation amplifier is packed in the form of TR.
OPA703NA/250 Features
5 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
OPA703NA/250 Applications
There are a lot of Texas Instruments OPA703NA/250 Instrumentational OP Amps applications.
- Active probe
- Communication device
- Ultrasound transducers
- Mobile phone
- Broadcasting
- Band-pass filter
- Signal amplification
- Micro signal measurement
- Automatic control
- Switching amplifier
