Products
Manufacturer
RFQ
NEWS
ContactOPA4196ID
20pA 140 dB Instrumentational OP Amps 0.00001999μA 4.5V~36V ±2.25V~18V OPA4196 14-SOIC (0.154, 3.90mm Width)
- Manufacturer: Texas Instruments
- NO: 815-OPA4196ID
- Package: 14-SOIC (0.154, 3.90mm Width)
- Datasheet:
- Stock: 2913
- Description: 20pA 140 dB Instrumentational OP Amps 0.00001999μA 4.5V~36V ±2.25V~18V OPA4196 14-SOIC (0.154, 3.90mm Width)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | OPA4196 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Current - Supply | 140μA |
| Slew Rate | 7V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Bandwidth | 2.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -3V |
| Unity Gain BW-Nom | 2500 kHz |
| Average Bias Current-Max (IIB) | 0.00001999μA |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 100μV |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Common-mode Reject Ratio-Min | 120 dB |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
OPA4196ID Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. On this buffer amplifier, there are 4 circuits. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that you use an 140μA power supply with this electrical part in order for it to operate correctly.
OPA4196ID Features
supply voltage of 3V
Output Type: Rail-to-Rail
OPA4196ID Applications
There are a lot of Texas Instruments OPA4196ID Instrumentational OP Amps applications.
- High gain DC amplifier
- Video computer boards
- Multiplication circuits
- Measurements of Wheatstone bridge
- Fast A/D and D/A converters
- Semiconductor detectors
- Mobile phone
- Laptop
- Displayers for aircraft and air transportation control systems
- Medical imaging
