Products
Manufacturer
RFQ
NEWS
ContactOPA404KP
4 Channels 10mA per Channel 1pA 84 dB Instrumentational OP Amps 0.0002μA 18V 10V~36V ±5V~18V OPA404 14 Pins 14-DIP (0.300, 7.62mm)
- Manufacturer: Texas Instruments
- NO: 815-OPA404KP
- Package: 14-DIP (0.300, 7.62mm)
- Datasheet:
- Stock: 2842
- Description: 4 Channels 10mA per Channel 1pA 84 dB Instrumentational OP Amps 0.0002μA 18V 10V~36V ±5V~18V OPA404 14 Pins 14-DIP (0.300, 7.62mm)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OPA404 |
| Pin Count | 14 |
| Operating Supply Voltage | 18V |
| Number of Channels | 4 |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 1W |
| Output Current | 9mA |
| Slew Rate | 35V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 6.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6400 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000012μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 6.4MHz |
| Max I/O Voltage | 2.5mV |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Difet® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
OPA404KP Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. The number of terminations approaches 14. A total of 14 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 14 pins. As far as the input offset voltage is concerned, linear amplifier rates at 750μV. For this electrical component, Through Hole is the recommended mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. An 9mA volt supply current is needed for this linear amplifier to operate. It is a member of the 100dB's 100dB family. On the buffer amps, there are 4 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 18V voltage. Difet? is the number that corresponds to the series of the buffer op amp.
OPA404KP Features
14 Pins
supply voltage of 15V
100dB voltage gain
OPA404KP Applications
There are a lot of Texas Instruments OPA404KP Instrumentational OP Amps applications.
- Weak signal detection
- PDA
- Broadcasting
- RF cable systems
- Measurements of Wheatstone bridge
- Radar
- Vehicle electronics
- Power generator
- Mobile phone
- Weighing systems
