Products
Manufacturer
RFQ
NEWS
ContactOPA330AIYFFR
5mA per Channel 200pA 100 dB Instrumentational OP Amps 1.8V~5.5V ±0.9V~2.75V OPA330 5 Pins 5-UFBGA, DSBGA
- Manufacturer: Texas Instruments
- NO: 815-OPA330AIYFFR
- Package: 5-UFBGA, DSBGA
- Datasheet:
- Stock: 3396
- Description: 5mA per Channel 200pA 100 dB Instrumentational OP Amps 1.8V~5.5V ±0.9V~2.75V OPA330 5 Pins 5-UFBGA, DSBGA(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | OPA330 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 21μA |
| Nominal Supply Current | 21μA |
| Output Current | 5mA |
| Slew Rate | 0.16V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 350kHz |
| Unity Gain BW-Nom | 350 kHz |
| Voltage Gain | 115dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 8μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Max I/O Voltage | 50μV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0006μA |
| Height | 625μm |
| Length | 1mm |
| Width | 1.293mm |
| Thickness | 400μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 5-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Operational Amplifier |
OPA330AIYFFR Overview
Packaged in a 5-UFBGA, DSBGA case, the buffer op amp is ready to use. An op amp ic of the Zero-Drift type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 5 terminations have been reported in the past few weeks. Buffer amplifier has a total of 5 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 5 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 50μV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using a supply current of 21μA , this buffer op amp will be able to operate. Voltage gain should remain at 115dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The linear amplifier consists of 1 different elements in total. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA330AIYFFR Features
5 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
OPA330AIYFFR Applications
There are a lot of Texas Instruments OPA330AIYFFR Instrumentational OP Amps applications.
- Signal transformation
- Non-polarized electrodes
- Instrumentation
- Semiconductor detectors
- Vehicle electronics
- Inverse/same-phase proportional circuit
- Automation control systems
- Addition operation circuits
- Car stereo
- Differentiator circuits
