NB7L111MMNG

NB7L111MMNG Overview

As far as the case type is concerned, the cut smart buffer is available in QFN. It is available in the case Tray. A total of 52 terminations are present in it. Using a supply voltage of 2.5V allows for high efficiency. It has been positioned in the way of Surface Mount. On this board, there is a pin count of 52. In order for the timeing clock to operate, it is connected to the 52 pins. It is contained in Clock Drivers. It is designed to operate at a minimum temperature of -40°C in order to maintain reliability. It is possible to achieve stable operation by setting the maximum operating temperature to 85°C. It is part of the 7L family of electronic buffer ICs. It uses a logic IC with a value of LOW SKEW CLOCK DRIVER. There is a default setting of output 10. There is a 2.5/3.3V volt supply attached to it. There is a maximum supply voltage of 3.465VV that can be handled by this clock divider. With a source voltage of 2.375V, it is possible to achieve optimal results. In order to achieve maximum efficiency, the supply voltage should be kept at 2.5V. As a result of utilizing this gadget, ALSO OPERATES WITH 3.3V SUPPLY is also available. The frequency of 5.5GHz maintains excellent accuracy.

NB7L111MMNG Features

52 terminations
Clock Drivers subcategory
logic IC type of LOW SKEW CLOCK DRIVER
at 5.5GHz frequency

NB7L111MMNG Applications

There are a lot of ON Semiconductor NB7L111MMNG Clock Buffers & Drivers applications.

• Data center
• Host bus adapter card
• Data communication
• Medical imaging
• Clock signal format conversion
• Medical instruments
• Network
• Handheld test instruments
• Information equipment
• Smartphone