NB4L339MNG

NB4L339MNG Overview

There is a case available for the cut smart buffer in 32-VFQFN Exposed Pad. A Tube is used to package it. It has 32 terminations. The supply voltage of 2.5V is capable of providing high efficiency. A mount of Surface Mount has been applied to it. Electronic components classified as Fanout Buffer (Distribution), Divider, Multiplexer fall into this category. It is recommended to set the temperature to -40°C~85°C so the system can perform reliably. With a 2.375V~3.6VV power source, it should work. It is located in the way of Surface Mount. It has a number of pins of 32. There is LVPECL output from clock driver. The 32 pins are utilized for operation. The NB4L339 family contains it. A member of the 4L family, this clock buffer is a digital camera. There is a 3.6V maximum supply voltage set (Vsup). To ensure normal operation of the cut smart buffer, the supply voltage (Vsup) should always be kept above 2.375V. As a result, it requires a supply voltage of 2.5/3.3V volts to run. A quiescent current of 90mA is consumed by it, and external influences do not affect it. The frequency 700MHz allows excellent accuracy to be maintained.

NB4L339MNG Features

32 terminations
The operating temperature of -40°C~85°C degrees
at 700MHz frequency

NB4L339MNG Applications

There are a lot of ON Semiconductor NB4L339MNG Clock Buffers & Drivers applications.

• Smartphone
• Patient diagnosis
• Defense and aerospace equipment
• Clock signal duplication
• Tower server
• High-end consumer electronics
• Consumer Electronics
• Network attached storage
• High performance communication system
• Car