NB3N511DG

NB3N511DG Overview

As a clock IC, PLLs is packaged using the Tube method. Embedded in the 8-SOIC (0.154, 3.90mm Width) package is this Clock PLL. It contains a total of 8 terminations within RF synthesizer. For this clock generator ic, a voltage of 3.3V is required. In this clock generator, Clock, Crystal is used as the input to the clock. This component can be conveniently installed on the panel thanks to the Surface Mount. There are 3.135V~5.25V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, TTL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Multiplier component. Clock PLL is equipped with 8 pin count. These related electrical parts are available for the base part number NB3N511. There are 8 pins that are available on the frequency generator. The device is usually classified as a type of Clock Generators device. When operated at 200MHz, frequency synthesizer achieves high efficiency. IC clock generator consists of 1 elements. This frequency synthesizer operates at a maximum current of 9mA.

NB3N511DG Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V

NB3N511DG Applications

There are a lot of ON Semiconductor NB3N511DG Clock Generators applications.

• Microwave point-to-point systems
• Satellite navigation communication
• Jitter reduction
• FM demodulation networks for FM operations
• Broadcast communication
• Radio receivers
• Satellite receivers
• Ultrasound diagnosis
• Microwave radio
• DVD recorders