NB3N3011DTG

NB3N3011DTG Overview

As a clock IC, it uses the Tube package. 8-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. This clock generator ic can sustain NOT SPECIFIED degrees of temperature during reflowing. As a result, frequency synthesizers can be found to contain 8 terminations. To operate this time clock generator, 3.3V voltage should be applied. The input of this clock generator is designed to be Crystal. To access the electronic component's full performance, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 120MHz is available. PLL clock is mounted in the way of Surface Mount. As far as the supply voltage is concerned, clock PLL can be used with 3.135V~3.465V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. LVPECL is designed for clock generator's output. This is an electronic part that can be classified as a Clock Generator in this case. It is a 8-bit clock PLL designed specifically for microprocessors. This clock generator is a member of PureEdge? series.

NB3N3011DTG Features

Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V

NB3N3011DTG Applications

There are a lot of Rochester Electronics, LLC NB3N3011DTG Clock Generators applications.

• Line cards used in telephone exchange
• Electronic equipment
• Ports
• Bluetooth transmitters
• Threshold extension
• Automatic control system test
• Simple clock clean-up circuits
• Various decoding circuits
• Medical equipment
• Peripheral devices