NB3N2302DG

NB3N2302DG Overview

In order to package it as a clock IC, the Tube package is used. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. In it, there are 8 terminations to be found. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. For full access to the electronic component's capabilities, 1 circuits are implemented. The Surface Mount allows this electrical component to be easily installed on the panel. It would take a maximum supply voltage of 3.465V to operate this time clock generator. As far as the supply voltage is concerned, clock PLL can be used with 3.135V~5.5V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. LVCMOS, LVTTL logic levels are supported by this RF synthesizer. Microprocessor-specific clock PLL with 8 bits. It is possible to find its related electronic parts by searching for the base part number NB3N2302. The frequency generator is equipped with 8 pins. The clock PLL is generally classified as a Clock Drivers device. The timing skew of this frequency synthesizer is low at 0.25 nsmax. By searching for the 3N family, it is possible to find similar electrical components. PLL BASED CLOCK DRIVER logic circuits are primarily constructed using this time clock generator. At 133MHz, frequency synthesizer achieves high efficiency. This RF synthesizer operation requires a maximum current of 50mA.

NB3N2302DG Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V

NB3N2302DG Applications

There are a lot of ON Semiconductor NB3N2302DG Clock Generators applications.

• Set-top boxes
• Microwave radio
• Test and instrumentation equipment
• Digital HDTV systems
• 1 Gigabit Ethernet
• Bluetooth receivers
• Microwave point-to-point systems
• Myriad digital applications
• Ultrasound diagnosis
• Microwave backhaul IF