NB2308AI2DTG

NB2308AI2DTG Overview

The Tube method is used for packaging clock ICs. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 16 terminations. Basically, this time clock generator needs a voltage of 3.3V. A clock generator's input is called Clock and it is designed as the input for this clock generator. To access the electronic component's full performance, 1 circuits are implemented. An upper frequency limit of 133.3MHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock generators can take up to 3.6V of power as a maximum supply voltageA maximum voltage of 3V should be used for this frequency generator for safety reasons. There are 3V~3.6V available for use with this clock PLL. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. Zero Delay Buffer is the type of electrical part that this component is classified as. Clock PLL is equipped with 16 pin count. This clock generator offers low timing skew at 0.2 ns Max. Analog clock generator is configured with 8 pins that enable the high true output. This PLL belongs to the family of 2308.

NB2308AI2DTG Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
8 true outputs

NB2308AI2DTG Applications

There are a lot of Rochester Electronics, LLC NB2308AI2DTG Clock Generators applications.

• Microwave radio
• Deep space exploration
• Peripheral devices
• Antenna automatic tracking
• FPGA and processor clocks
• Aerospace and defense
• FSK demodulators
• High-frequency induction heating
• Wide area power system
• Digital logic circuits