NB2308AI1HDTR2G

NB2308AI1HDTR2G Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. There is a clock generator embedded in the 16-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 16 terminations in this file. To operate this time clock generator, 3.3V voltage should be applied. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. 1 circuits are implemented to access the electronic component's full performance. An upper frequency limit of 133.3MHz Max can be achieved with this clock-based frequency synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. This clock PLL works with a supply voltage of 3V~3.6V. The temperature should be set at -40°C~85°C to ensure reliable performance. This electronic component can be classified into Zero Delay Buffer. It is a 16-bit clock PLL designed specifically for microprocessors. This clock generator offers low timing skew at 0.2 ns Max. 8 pins are configured for high true output enable in this clock generator. By searching for parts that belong to the 2308 family, you can find electronic parts that are similar.

NB2308AI1HDTR2G Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
8 true outputs

NB2308AI1HDTR2G Applications

There are a lot of Rochester Electronics, LLC NB2308AI1HDTR2G Clock Generators applications.

• Sampling clocks for ADC and DAC
• FMCW Radar
• High-speed communication applications
• Reference signals to RF systems
• Phase modulation cellular systems
• Digital circuits
• Threshold extension
• Microwave point-to-point systems
• Remote telemetry and instrumentation
• Automatic control