NB2308AI1HDTG

NB2308AI1HDTG Overview

The Tube method is used for packaging clock ICs. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. 16 terminations can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3.3V. This clock generator receives its inputs from Clock, which is designed to be the clock source. 1 circuits are used to achieve clock PLL's superior flexibility. RF synthesizers based on this clock provide frequencies up to 133.3MHz maximum. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. It is safe to use this frequency synthesizer with a supply voltage above 3V. There are 3V~3.6V available for use with this clock PLL. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. This electronic component can be classified as a Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The timing skew of this frequency synthesizer is low at 0.2 nsmax. 8 pins are configured for high true output enable in this clock generator. This clock generator belongs to the family of 2308.

NB2308AI1HDTG Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
8 true outputs

NB2308AI1HDTG Applications

There are a lot of Rochester Electronics, LLC NB2308AI1HDTG Clock Generators applications.

• VSAT (Small Ground Satellite Station)
• Wide area power system
• Phase modulation cellular systems
• Mixed mode (analog and digital) applications
• Line cards used in telephone exchange
• Digital logic circuits
• Signal demodulation
• Microwave radio
• Coherent carrier tracking
• Ports