NB2304AI1HDR2G

NB2304AI1HDR2G Overview

Tape & Reel (TR)-method packaging is used for clock ICs. Embedded in the 8-SOIC (0.154, 3.90mm Width) package is this Clock PLL. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. In it, there are 8 terminations to be found. To operate this time clock generator, 3.3V voltage should be applied. This Clock PLL will be fed by CMOS as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133.3MHz. The Surface Mount allows the electrical component to be installed conveniently on the panel. Approximately 3.6V is the maximum supply voltage needed by this time clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. As long as you provide 3V~3.6V supply voltage, it will work. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. It has been classified as a Zero Delay Buffer electronic part, which means that it is a semiconductor. Microprocessor-specific clock PLL with 8 bits. The maximal same edge skew (tskwd) can not be exceeded. The clock generator is configured with 4 pins for enabling true outputs. When searching for parts belonging to the 2304 family, similar electric components can be found.

NB2304AI1HDR2G Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
4 true outputs

NB2304AI1HDR2G Applications

There are a lot of Rochester Electronics, LLC NB2304AI1HDR2G Clock Generators applications.

• Wireless base station for LTE, LTE-advanced
• Threshold extension
• Bluetooth transmitters
• Smartphones
• Electronic equipment
• Pulsed digital systems
• Fiber Channel
• Main oscillator in receiver
• Navigation, positioning and surveillance system for aircraft, ships and ships
• PCI express cards