MPC9772AER2

MPC9772AER2 Overview

In the LQFP package, there is an embedded clock generator. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. There are 52 terminations found in this file. The clock generator ic should be grounded with a voltage of 3.3V. This Clock PLL will be fed by Crystal as its input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. The frequency generator has a maximum frequency of 240MHz. This RF synthesizer has CLOCK GENERATOR, OTHER uPs, uCs, and peripheral ICs. It is a 52-bit clock PLL designed specifically for microprocessors. There are a number of 52 pins that are available on the clock generators. The operating temperature should be higher than 0°C. At 70°C, this RF synthesizer remains functional despite reduced performance. The supply voltage should be maintained at 3.3V for high efficiency. And basically, this clock generator is often classified as a kind of Clock Generators. This frequency synthesizer features CAN ALSO OPERATE AT 2.5V SUPPLY to produce better clock signals. It is unacceptable to supply this clock PLL with a voltage higher than 3.465V. Powered by 3V, this clock generator has the lowest supply voltage limit.

MPC9772AER2 Features

Available in the LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V

MPC9772AER2 Applications

There are a lot of Integrated Device Technology (IDT) MPC9772AER2 Clock Generators applications.

• Test equipment
• Frequency shifting decodes
• Clock synchronization
• Microprocessor clock multipliers
• Signal generator
• Pagers
• 1 Gigabit Ethernet
• Broadcast communication
• Frequency synthesis
• Clock signals to the high-speed Digital RF circuits