MPC9315AC

MPC9315AC Overview

Clock PLL is embedded in the TQFP package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. As a result of this, we can find 32 terminations. For this clock generator ic, a voltage of 2.5V is required. In this clock generator, LVCMOS is used as the input to the clock. It is possible to access the full performance of the electrical part by implementing 1 circuits. It provides a maximum frequency of 160MHz. An IC that generates clocks specifically for microprocessors, this clock PLL is 32-bits in si32e. The clock PLL has 32 pins that are available. Despite its low operating temperature, this clock generator has -40°C operations. With attenuated performance, this RF synthesizer can survive at 85°C. In terms of the supply voltage, analog clock generator can handle 3.3V volts. Clock Drivers-type frequency generators are usually classified as this type. There is a ALSO OPERATES AT 3.3V SUPPLY feature on this frequency generator in order to produce a better clock signal. There are 8 pins that are configured to enable high true output on this analog clock generator. There is no way that a voltage higher than 3.465V can be supplied to this clock generator. This clock generator ic requires a voltage supply no lower than 2.375V. The PLL BASED CLOCK DRIVER logic circuits primarily use this clock device.

MPC9315AC Features

Available in the TQFP
Supply voltage of 2.5V
Operating supply voltage of 3.3V
8 true outputs

MPC9315AC Applications

There are a lot of Integrated Device Technology (IDT) MPC9315AC Clock Generators applications.

• Test and instrumentation equipment
• FPGA and processor clocks
• Signal generator
• FM demodulation networks for FM operations
• Signal analyzer
• Wide area power system
• Clock synchronization
• FSK demodulators
• Coherent detection of the signal
• MRI