MPC9230EIR2

MPC9230EIR2 Overview

Clock ICs are packaged using the Tape & Reel method. The PLCC package embeds this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 28 terminations found in this file. A voltage of 3.3V should be applied to this electronic frequency generator. There is a Clock PLL called Crystal which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. There is a maximum frequency of 750MHz Max with this clock-based frequency generator. There are CLOCK GENERATOR, OTHER uPs/uCs/Peripheral ICs integrated into this digital clock generator. It is a 28-bit clock PLL designed specifically for microprocessors. There are 28 pins that are available on the frequency generator. There are -40°C operations available on this frequency generator and it operates at low temperatures. At a temperature of 85°C, the clock generator ic can operate with attenuated performance. Time clock generator can handle a voltage of 3.3V as the supply voltage. Clock Generators-type frequency generators are usually classified as this type. In order to supply this clock PLL, a voltage greater than 3.465V is not acceptable. Clock PLL operates with the minimal supply voltage of 3.135V.

MPC9230EIR2 Features

Available in the PLCC
Supply voltage of 3.3V
Operating supply voltage of 3.3V

MPC9230EIR2 Applications

There are a lot of Integrated Device Technology (IDT) MPC9230EIR2 Clock Generators applications.

• Electronic countermeasures
• Quenching?
• Bluetooth transmitters
• Wide area power system
• Coherent carrier tracking
• Microwave backhaul IF
• Media broadcast servers
• Bluetooth receivers
• VSAT (Small Ground Satellite Station)
• Reference signals to RF systems