MK1709AGLFTR

MK1709AGLFTR Overview

As a clock IC, PLLs is packaged using the Tape and Reel method. In the TSSOP package, there is an embedded clock generator. It contains 8 terminations that can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3.3V. Clock is designed as this clock generator's input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 165MHz Max can be achieved with this clock-based frequency synthesizer. In particular, this clock PLL is designed to be used with microprocessors. The frequency generator is equipped with 8 pins. In addition to having an impressive low-temperature performance, this clock device can perform 0°C operations simultaneously. It is possible for the clock generator ic to work at 85°C with a reduced performance. In terms of the supply voltage, analog clock generator can handle 3.3V volts. 1 high true output enable pins are available on this clock generator. Clock generator operates with the maximal supply voltage of 3.6V. This RF synthesizer can handle voltages as low as 3.135V.

MK1709AGLFTR Features

Available in the TSSOP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
1 true outputs

MK1709AGLFTR Applications

There are a lot of Integrated Device Technology (IDT) MK1709AGLFTR Clock Generators applications.

• Space communucation
• High-speed optical transport network (OTN)
• CPUs
• Bluetooth receivers
• Set-top boxes
• Automatic control system test
• VSAT (Small Ground Satellite Station)
• Microwave point-to-point systems
• Coherent detection of the signal
• Various decoding circuits