MK1705ALFTR

MK1705ALFTR Overview

The Tape and Reel method is used for packaging clock ICs. SOIC contains this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. 8 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. For full access to the electronic component's capabilities, 1 circuits are implemented. An upper frequency limit of 167MHz Max can be achieved with this clock-based frequency synthesizer. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. The clock PLL has 8 pins that are available. This clock generator ic has an impressive low-temperature operating performance and is capable of 0°C operations. The operating temperature should be lower than 70°C. A voltage exceeding 5.5V is not acceptable for supply to this frequency generator. The lowest limit of supply voltage for this RF synthesizer is 3V.

MK1705ALFTR Features

Available in the SOIC
Supply voltage of 3.3V

MK1705ALFTR Applications

There are a lot of Integrated Device Technology (IDT) MK1705ALFTR Clock Generators applications.

• Smartphones
• Televisions
• Microwave backhaul IF
• Microwave radio
• Clock synchronization
• Cable television converter boxes
• Myriad digital applications
• Fiber Channel
• Bluetooth transmitters
• Bluetooth receivers