MCP795B20-I/ST

MCP795B20-I/ST Overview

14-TSSOP (0.173, 4.40mm Width) is where you'll find real time clocks.As you can see, time clock is packaged as if time clock were in the form of Tube.It requires a voltage of 1.8V~5.5V to be supplied.The type of this electrical real time clock is Clock/Calendar.As you can see from the diagram, this electronic component is mounted in the way of Surface Mount.Electronic time clocks should be -40°C~85°C degrees Celsius during operation.Electronic time clocks are possible to guarantee Alarm, EEPROM, Leap Year, Square Wave Output, SRAM, Unique ID, Watchdog Timer when operating.There is the possibility of terminating transmission lines with 14 terminations, which means that the equipment used to terminate the line will match its characteristic impedance.In this case, the voltage supplied to the electronic component is 5V.It is equipped with 14 pins.The family RTCs belongs to are MCP795B20.This electrical digital time clock is powered by a voltage that is 1.3V~5.5V at the time of installation.In Timer or RTC, this part is included.A memory of 64B is embedded in the RTC times, which can be used to store programs and data.It should not exceed 10MHz as the output frequency of the real time analog clock.For powering the real time clock, a power supply with a voltage of 2/5V is used.Furthermore, ALSO OPEARTES AT 1.8 V MINIMUM SUPPLY AT 3 MHZ are its characteristics.With 8 Bits, this digital time clock is designed.

MCP795B20-I/ST Features

14-TSSOP (0.173, 4.40mm Width) package
14 terminations
14 pin count
2/5V power supplies
8 Bits

MCP795B20-I/ST Applications

There are a lot of Microchip Technology MCP795B20-I/ST Real Time Clocks applications.

• Printers
• Utility Meters
• Medical Devices
• Routers
• Digital voice recorders
• Vending Machine
• GPS/Telematics Devices
• Power Meters
• Wearables, Portables
• POS Terminal