MCP6S26-I/ST

MCP6S26-I/ST Overview

There is a 14-TSSOP (0.173, 4.40mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Programmable Gain-type. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 14 terminations in the next few months. It consists of a total of 14 pins in total. This linear amplifier should be powered by an 4V battery. It should be noted that this op amp is a type of Other Analog ICs device. An 14-pin op amp ic is included in the package. Op amp rates 275μV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. You can run this op amp ic on 1mA . The voltage gain should stay at 30.1dB. On this instrumentation amplifier, there are 6 circuits that are connected together. In addition to outputting Push-Pull, Rail-to-Rail signals, this op amp ic offers a number of other advantages. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 5V. Op amp resistance should stay within the range of 6.4kOhm. It should be noted that the other type of analog integrated circuit used in this instrumentation amplifier is known as the ANALOG CIRCUIT.

MCP6S26-I/ST Features

14 Pins
supply voltage of 4V
30.1dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
Resistance of 6.4kOhm

MCP6S26-I/ST Applications

There are a lot of Microchip Technology MCP6S26-I/ST Instrumentational OP Amps applications.

• Exponential operation circuits
• Division circuits
• Micro signal measurement
• E-book readers
• Cinema or auditorium audio system
• Semiconductor detectors
• Blood pressure sensors
• Differentiator circuits
• pH (acidity)
• Scintillation detectors