+86 17610397725 info@chipsmt.com
English
MCP6H02T-E/MNY
  • MCP6H02T-E/MNY

MCP6H02T-E/MNY

2 Channels 10pA 78 dB Instrumentational OP Amps 8V 3.5V~16V ±1.75V~8V MCP6H02 8 Pins 8-WFDFN Exposed Pad


  • Manufacturer: Microchip Technology
  • NO: 536-MCP6H02T-E/MNY
  • Package: 8-WFDFN Exposed Pad
  • Datasheet: pdf
  • Stock: 2093
  • Description: 2 Channels 10pA 78 dB Instrumentational OP Amps 8V 3.5V~16V ±1.75V~8V MCP6H02 8 Pins 8-WFDFN Exposed Pad(Kg)

Quantity:


  • Delivery: Delivery
  • Payment: payment

In Stock

Please send RFQ , we will respond immediately.

authentication (1) authentication (2) authentication (3) authentication (4) authentication (5) authentication (6) authentication (7) authentication (8) authentication (9)

Purchase & Inquiry

Transport

User guide

Purchase

You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.transport

SPECIFICATIONS

Parameters
Factory Lead Time 8 Weeks
Contact Plating Gold
Mount Surface Mount, Through Hole
Mounting Type Surface Mount
Package / Case 8-WFDFN Exposed Pad
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Published 2003
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MCP6H02
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 8V
Number of Channels 2
Number of Circuits 2
Nominal Supply Current 135μA
Output Current 50mA
Slew Rate 0.8V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 78 dB
Current - Input Bias 10pA
Voltage - Supply, Single/Dual (±) 3.5V~16V ±1.75V~8V
Input Offset Voltage (Vos) 3.5mV
Bandwidth 1.2MHz
Unity Gain BW-Nom 1200 kHz
Voltage Gain 115dB
Power Supply Rejection Ratio (PSRR) 87dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 17V
Voltage - Input Offset 700μV
Low-Bias YES
Micropower YES
Height 750μm
Length 2mm
Width 3mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MCP6H02T-E/MNY Overview


Packaging for the buffer amplifier is in the form of a 8-WFDFN Exposed Pad case. An op amp ic of the General Purpose type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There is a growing number of terminations approaching the number of 8. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are located on the operational amplifiers. The input offset voltage is 3.5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . There should be no change in the voltage gain. This op amp contains 2 circuits. Buffer op amp is equipped with 2 channels on the device. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 8V voltage. The linear amplifier is packaged by using a TAPE AND REEL axis.

MCP6H02T-E/MNY Features


8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail

MCP6H02T-E/MNY Applications


There are a lot of Microchip Technology MCP6H02T-E/MNY Instrumentational OP Amps applications.

  • ECG equipment
  • High input resistance broadband
  • Computer workstations
  • Signal transformation
  • Signal filtering
  • Power transmission
  • Weighing systems
  • Automation control systems
  • Video computer boards
  • Integrator circuits
Hit enter to search or ESC to close

In Stock

Please send RFQ , we will respond immediately.

RFQ List (0 Items)