+86 17610397725 info@chipsmt.com
English
MCP632T-E/MF
  • MCP632T-E/MF

MCP632T-E/MF

70mA per Channel 4pA 63 dB Instrumentational OP Amps 0.005μA 2.5V~5.5V MCP632 8 Pins 8-VDFN Exposed Pad


  • Manufacturer: Microchip Technology
  • NO: 536-MCP632T-E/MF
  • Package: 8-VDFN Exposed Pad
  • Datasheet: pdf
  • Stock: 1114
  • Description: 70mA per Channel 4pA 63 dB Instrumentational OP Amps 0.005μA 2.5V~5.5V MCP632 8 Pins 8-VDFN Exposed Pad(Kg)

Quantity:


  • Delivery: Delivery
  • Payment: payment

In Stock

Please send RFQ , we will respond immediately.

authentication (1) authentication (2) authentication (3) authentication (4) authentication (5) authentication (6) authentication (7) authentication (8) authentication (9)

Purchase & Inquiry

Transport

User guide

Purchase

You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.transport

SPECIFICATIONS

Parameters
Factory Lead Time 8 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-VDFN Exposed Pad
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MCP632
Pin Count 8
Output Type Rail-to-Rail
Number of Elements 2
Power Supplies 3/5V
Operating Supply Current 2.5mA
Nominal Supply Current 2.5mA
Output Current 70mA
Slew Rate 10V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 63 dB
Current - Input Bias 4pA
Voltage - Supply, Single/Dual (±) 2.5V~5.5V
Output Current per Channel 70mA
Input Offset Voltage (Vos) 1.8mV
Gain Bandwidth Product 24MHz
Unity Gain BW-Nom 24000 kHz
Voltage Gain 124dB
Average Bias Current-Max (IIB) 0.005μA
Power Supply Rejection Ratio (PSRR) 61dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 6.5V
Low-Bias YES
Micropower NO
Programmable Power NO
Wideband NO
Height Seated (Max) 1mm
Length 3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MCP632T-E/MF Overview


There is a 8-VDFN Exposed Pad case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. The linear amplifier should be run at 2.5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 1.8mV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 2.5mA. You should keep the voltage gain at 124dB for the time being. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There are 2 elements in total in this linear amplifier. The instrumentation amplifier is packed in the form of TAPE AND REEL.

MCP632T-E/MF Features


8 Pins
supply voltage of 2.5V
124dB voltage gain
Output Type: Rail-to-Rail

MCP632T-E/MF Applications


There are a lot of Microchip Technology MCP632T-E/MF Instrumentational OP Amps applications.

  • Power transmission
  • Integrator circuits
  • Addition operation circuits
  • Strain gauges
  • Automation control systems
  • Television
  • Proportional operation circuits
  • Micro signal measurement
  • Communication device
  • Inverse/same-phase proportional circuit
Hit enter to search or ESC to close

In Stock

Please send RFQ , we will respond immediately.

RFQ List (0 Items)