Products
Manufacturer
RFQ
NEWS
ContactMCP4441T-503E/ST
20 Terminations2.7V 20 Pin MCP4441 Digital PotentiometersWiperLock? Series I2C128 Positions
- Manufacturer: Microchip Technology
- NO: 536-MCP4441T-503E/ST
- Package: 20-TSSOP (0.173, 4.40mm Width)
- Datasheet:
- Stock: 8576
- Description: 20 Terminations2.7V 20 Pin MCP4441 Digital PotentiometersWiperLock? Series I2C128 Positions(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | WiperLock™ |
| Tolerance | ±20% |
| JESD-609 Code | e3 |
| Feature | Selectable Address |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Temperature Coefficient | 150 ppm/°C |
| Resistance | 50kOhm |
| Number of Positions | 128 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Voltage - Supply | 1.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCP4441 |
| Pin Count | 20 |
| Power Supplies | 3/5V |
| Configuration | Potentiometer |
| Interface | I2C |
| Number of Circuits | 4 |
| Nominal Supply Current | 600μA |
| Memory Type | Non-Volatile |
| Bandwidth | 0.2 kHz |
| Taper | Linear |
| Number of Taps | 129 |
| Total Resistance | 50000Ohm |
| Resistance - Wiper (Ω) (Typ) | 75 |
| Resistor Terminal Voltage-Max | 5.5V |
| Height Seated (Max) | 1.2mm |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MCP4441T-503E/ST Overview
There are 20-TSSOP (0.173, 4.40mm Width) packages in this package.By Non-Volatile, this pentometer begins to be stored.Embedded in this digital potentiometer are 4 circuits.In the Tape & Reel (TR) package, it is accessible for securing the digital analogic.This pentometer is protected from overcurrent by 129 taps.Positions are 128.As a result, digital potentiometer has been designed to terminate at 20.Listed below are 4 functions included in this programmable potentiometer.As shown, the speed potentiometers's resistance will be 50000Ohm.To deliver its performance, it is powered by 2.7V.On the digi devices, you can see the 20 pins.The mounting direction should be Surface Mount.It can supply voltages up to 1.8V~5.5V.For this digital potentiometer, there is a temperature range of -40°C~125°C.You can limit the flow by using 50kOhm.MCP4441 is a family member.The mount is Surface Mount.20 pins are available on this potentiameter.This digital variable resistor contains Selectable Address.The potentiameter is capable of delivering voltage at 3/5V.
MCP4441T-503E/ST Features
Available in 20-TSSOP (0.173, 4.40mm Width) package
4 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~125°C
20 pins
MCP4441T-503E/ST Applications
There are a lot of Microchip Technology MCP4441T-503E/ST Digital Potentiometers applications.
- Adjustable gain amplifiers
- Brightness of monitors
- Matching Linear Impedance
- Testing equipment
- Speakers
- Instrumentation (gain or offset adjustment)
- Calibration instrumentation
- Automatic detection of equipment
- Used as programmable gain amplifier
- Medical equipment
