Products
Manufacturer
RFQ
NEWS
ContactMC33171P
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 220μA |
| Max Supply Current | 250μA |
| Current - Output | 5mA |
| Slew Rate | 2.1 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Input Offset Voltage (Vos) | 5mV |
| Gain Bandwidth Product | 1.8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1800 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 22V |
| Micropower | YES |
| Min Dual Supply Voltage | 1.5V |
| Nominal Gain Bandwidth Product | 1.8MHz |
| Height | 5.0038mm |
| Length | 10.0076mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 8 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
MC33171P Overview
In the package, you will find a PDIP-case to contain the op amp ic. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. There should be no change in the voltage gain at 113.98dB. Buffer op amp is equipped with 1 channels on the device. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. In order to avoid damage to the product, instrumentation amplifier should only be used at temperatures below 85°C. The operating supply voltage of instrumentation amplifier is rated 22V voltage. For packing the buffer amplifier, the RAIL-axis is adopted. With regard to the supply voltage, this electrical component is capable of working from under 44V. As a general rule, it is advisable to keep the op amp's supply voltage above 3V at all times. In order to conduct this part, you will need to provide dual supply voltages of 22V volts.
MC33171P Features
8 Pins
supply voltage of 15V
113.98dB voltage gain
MC33171P Applications
There are a lot of ON Semiconductor MC33171P Instrumentational OP Amps applications.
- Wireless base stations
- Portable docking station
- Proportional operation circuits
- Car stereo
- Broadcasting
- Professional videography
- Industrial control system
- Voltage regulation circuit
- Cinema or auditorium audio system
- High-frequency data acquisition systems
