MC10H646FN

MC10H646FN Overview

The clock divider is available in 28-LCC (J-Lead) case. There is a Tube package attached to it. There is a maximum value of 80MHz for normal operation. A total of 28 terminations are present. The supply voltage of 5V can be used to achieve high efficiency. A mount of Surface Mount has been applied to it. Electronic parts classified as Fanout Buffer (Distribution) are considered to be safety components. Setting the temperature to 0°C~85°C will ensure reliable performance. This circuit clock should be able to operate on a power supply of 4.75V~5.25V volts. Its recommended mounting way is Surface Mount. There are 28 pins on the clock buffer. There is TTL output from clock driver. A 28 pin is used for operation. It belongs to the family of MC10H646. A cut smart buffer of this type is contained in Clock Drivers. It is part of the 10H family of electronic buffer ICs. This is set to 5.25V for the maximum supply voltage. As a rule, the supply voltage (Vsup) should be kept above 4.75V for normal operation. There is a voltage supply of 5V volts for powering it.

MC10H646FN Features

28 terminations
The operating temperature of 0°C~85°C degrees
Clock Drivers subcategory

MC10H646FN Applications

There are a lot of ON Semiconductor MC10H646FN Clock Buffers & Drivers applications.

• OTN
• Synchronous digital system
• Host bus adapter card
• Other clock/data distribution
• High speed line receiver
• Defense and aerospace equipment
• Patient diagnosis
• Window comparator
• Hardware accelerator
• Fibre channel (FC)