MC10E111FNG

MC10E111FNG Overview

There is a case of 28-LCC (J-Lead) in which it is packaged. There is a Tube package attached to it. It has 28 terminations. Supply voltages of 5V enable high efficiency. As you can see, it is mounted by Surface Mount. There is a classification of Fanout Buffer (Distribution) for this electronic part. Setting the temperature to -40°C~85°C ensures reliable performance. In general, it should be able to work with a power source of 4.2V~5.7V volts. It has been positioned in the way of Surface Mount. The clock buffer contains 28 pins. The output is ECL, PECL. Operation is performed using the 28 pins. As a member of the MC10E111 family, it falls under that category. There is a cut smart buffer contained in Clock Drivers that is used for this purpose. A member of the 10E family, this clock buffer is a digital camera. The maximum supply voltage (Vsup) has been set to 5.7V. The supply voltage (Vsup) should be maintained above 4.2V in order for the clock divider to operate normally. As a default, it is set to output 18. Power for the clock buffer comes from a -5.2V volt supply. This electrical component belongs to the 10E series. As a result of utilizing this gadget, NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V is also available. The frequency 800MHz allows excellent accuracy to be maintained. It can accept voltages up to 4.19V.

MC10E111FNG Features

28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 800MHz frequency

MC10E111FNG Applications

There are a lot of ON Semiconductor MC10E111FNG Clock Buffers & Drivers applications.

• Machine made
• Data transmission
• Line receiver and signal recovery
• Mass storage system
• Navigation equipment
• Data center
• High speed instrument
• High reliability telecommunication system
• Gigabit Ethernet (GbE)
• 5G