MC100LVEP34DR2

MC100LVEP34DR2 Overview

Clock generator is packaged in the way of Cut Tape (CT). SOIC contains this Clock PLL. The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible. It contains a total of 16 terminations within RF synthesizer. This clock generator ic should receive a voltage of 2.5V. This clock generator receives its inputs from CML, which is designed to be the clock source. To access the full performance of the electronic component, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 2.8GHz. The maximum voltage this clock PLL can handle is 3.8V. Keeping the supply voltage for this frequency synthesizer above 2.375V is recommended for safety reasons. The clock-generating IC is a 16-bit device designed specifically for microprocessors. It is possible to connect to the PLL via 16 pins. There are -40°C operations that can be performed on this clock generator, which has impressive low-temperature performance. Despite its attenuated performance, this frequency synthesizer can last at 85°C. As such, it is often referred to as a kind of Clock Drivers clock PLL. NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V is included in this frequency generator to enhance clock signal output. At 0.035 ns Max, this analog clock generator exhibits low timing skew. There are 3 true outputs. Logic circuits based on LOW SKEW CLOCK DRIVER logic use this electronic frequency generator.

MC100LVEP34DR2 Features

Available in the SOIC
Supply voltage of 2.5V
3 true outputs

MC100LVEP34DR2 Applications

There are a lot of ON Semiconductor MC100LVEP34DR2 Clock Generators applications.

• Picocells, femtocells and small cells
• Small signal recovery
• 1 Gigabit Ethernet
• CPUs
• Microwave backhaul IF
• FM demodulation networks for FM operations
• Carrier synchronization in wired communication
• Broadcast communication
• Digital logic circuits
• Local oscillators (LOs)