MC100LVEL13DWG

MC100LVEL13DWG Overview

The clock divider is available in 20-SOIC (0.295, 7.50mm Width) case. It is available in the case Tube. There is a maximum value of 1GHz for normal operation. There are 20 terminations in it. Supply voltages of 3.3V are capable of achieving high efficiency. As far as I can tell, it is mounted by Surface Mount. An electronic component classified as Fanout Buffer (Distribution) is categorized as such. If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. In order for it to function, a power source of 3V~3.8V V must be available. It is placed in the way of Surface Mount. A pin count of 20 can be found on it. There is a value of ECL, PECL as the output. In order for the timeing clock to operate, it is connected to the 20 pins. As a member of the MC100LVEL13 family, it falls under that category. There is a circuit clock contained within Clock Drivers that is responsible for this function. A maximum supply voltage (Vsup) is set to 3.8V. To ensure normal operation of the cut smart buffer, the supply voltage (Vsup) should always be kept above 3V. As a default, it is set to output 12 by default. There is a -3.3V volt supply that powers the timeing clock. It is part of the 100LVEL series of electrical components. With the help of this gadget, NECL MODE: 0V VCC WITH VEE = -3V TO -3.8V can also be obtained.

MC100LVEL13DWG Features

20 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

MC100LVEL13DWG Applications

There are a lot of ON Semiconductor MC100LVEL13DWG Clock Buffers & Drivers applications.

• Peak detection
• Zero crossing detector
• DDR4 JEDEC standard LRDIMM design
• Network
• Machine made
• Industrial automation control system
• Telecommunications
• Big data
• Base station
• Handheld test instruments