MC100EL38DWG

MC100EL38DWG Overview

As a clock IC, it is packaged by the Tube method. A Clock PLL is included with the 20-SOIC (0.295, 7.50mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 20 terminations found in the file. A voltage of 5V should be applied to this electronic frequency generator. A clock generator's input is called NECL, PECL and it is designed as the input for this clock generator. 1 circuits are implemented to access the electronic component's full performance. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 1.2GHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. 5.7V would be the maximum supply voltage for this clock generator. For safety reasons, this frequency generator's supply voltage should remain above 4.2V. As far as the supply voltage is concerned, clock PLL can be used with 4.2V~5.7V. Based on test statistics, ambient temperature should be set at -40°C~85°C. The RF synthesizer is compatible with ECL logic levels. This electronic component can be classified into Clock Generator. It is a 20-bit clock PLL designed specifically for microprocessors. This electronic part is a member of the 100EL series. There is a low timing skew at 0.075 nsmax with this RF synthesizer.

MC100EL38DWG Features

Available in the 20-SOIC (0.295, 7.50mm Width)
Supply voltage of 5V

MC100EL38DWG Applications

There are a lot of Rochester Electronics, LLC MC100EL38DWG Clock Generators applications.

• Signal modulation and demodulation
• High-frequency induction heating
• Signal demodulation
• Automatic test equipment
• Tracking filters
• Line cards used in telephone exchange
• PMR (Professional Mobile Radio)
• Bluetooth transmitters
• GPS systems
• Telecommunication systems