+86 17610397725 info@chipsmt.com
English
MAX492ESA+
  • MAX492ESA+

MAX492ESA+

25nA 90 dB Instrumentational OP Amps 0.1μA 2.7V~6V ±1.35V~3V MAX492 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Maxim Integrated
  • NO: 503-MAX492ESA+
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: pdf
  • Stock: 9894
  • Description: 25nA 90 dB Instrumentational OP Amps 0.1μA 2.7V~6V ±1.35V~3V MAX492 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Quantity:


  • Delivery: Delivery
  • Payment: payment

In Stock

Please send RFQ , we will respond immediately.

authentication (1) authentication (2) authentication (3) authentication (4) authentication (5) authentication (6) authentication (7) authentication (8) authentication (9)

Purchase & Inquiry

Transport

User guide

Purchase

You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.transport

SPECIFICATIONS

Parameters
Factory Lead Time 6 Weeks
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 1997
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 6V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number MAX492
Pin Count 8
Qualification Status Not Qualified
Output Type Rail-to-Rail
Power Supplies 3/5V
Number of Circuits 2
Current - Supply 150μA
Slew Rate 0.2V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 90 dB
Current - Input Bias 25nA
Voltage - Supply, Single/Dual (±) 2.7V~6V ±1.35V~3V
Bandwidth 500 kHz
Unity Gain BW-Nom 500 kHz
Average Bias Current-Max (IIB) 0.1μA
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 7V
Voltage - Input Offset 200μV
Current - Output / Channel 30mA
Micropower YES
Bias Current-Max (IIB) @25C 0.06μA
Voltage Gain-Min 10000
Height Seated (Max) 1.75mm
Length 4.9mm
RoHS Status ROHS3 Compliant

MAX492ESA+ Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 6V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. There are 2 circuits on this op amp. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. We recommend that you use this electronic part with an 150μA supply in order to get the best performance from it. This op amp ic can conduct a minimum voltage gain of 10000.

MAX492ESA+ Features


8 Pins
supply voltage of 6V
Output Type: Rail-to-Rail

MAX492ESA+ Applications


There are a lot of Maxim Integrated MAX492ESA+ Instrumentational OP Amps applications.

  • Power generator
  • Image computer boards
  • Tablets
  • Laptop
  • Radiation thermometry transducers
  • Commercial audio systems
  • Switching amplifier
  • PDA
  • Broadcasting
  • Division circuits
Hit enter to search or ESC to close

In Stock

Please send RFQ , we will respond immediately.

RFQ List (0 Items)