Products
Manufacturer
RFQ
NEWS
ContactMAX491ECSD
14 Terminations5V 14 Pin MAX491 Receivers1 Bits 1/1 Drivers/Receivers1 Functions
- Manufacturer: Maxim Integrated
- NO: 503-MAX491ECSD
- Package: 14-SOIC (0.154, 3.90mm Width)
- Datasheet:
- Stock: 7597
- Description: 14 Terminations5V 14 Pin MAX491 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX491 |
| Pin Count | 14 |
| Output Voltage | 3V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 300μA |
| Propagation Delay | 60 ns |
| Supply Current-Max | 0.5mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 2.5Mbps |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Output Low Current-Max | 0.004A |
| High Level Input Current-Max | 0.000002A |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 338.011364mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 667mW |
| Technology | CMOS |
MAX491ECSD Overview
Driver ICs with enhanced 14-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The Tube package contains this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.This differential driver uses 4.75V~5.25V for power supply.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.This line driver ic can operate efficiently with a supply voltage range of 5V.In this wide receiver, 14 terminations are integrated for driving and receiving signals from data.The transceiver is packaged with 14 market standard pinouts so that it can be easily used.You can search with MAX491 to get more variants of this part, since it identifies the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 14 pins.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.In most cases, the receiver will be specified with a 1-bit resolution.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.ICs implement a total of 1 transceivers.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 0.5mA of input current.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 300μA.The device is capable of delivering voltage at 3V.
MAX491ECSD Features
Tube package
14 pin count
14 pins
5V power supply
MAX491ECSD Applications
There are a lot of Maxim Integrated MAX491ECSD Drivers/Receivers/Transceivers applications.
- Wireless transmission
- Cell phones
- Car alarm systems
- Transmission stations
- Pocket PC
- Fiber distributed data interface (FDDI)
- Indoor ad hoc meeting
- interconnection between switches
- Precision engineering measurement
- Datacom networking applications
