Products
Manufacturer
RFQ
NEWS
ContactMAX487CPA
8 TerminationsMAX487 Receivers1 Bits 1/1 Drivers/Receivers1 Functions
- Manufacturer: Maxim Integrated
- NO: 503-MAX487CPA
- Package: 8-DIP (0.300, 7.62mm)
- Datasheet:
- Stock: 3730
- Description: 8 TerminationsMAX487 Receivers1 Bits 1/1 Drivers/Receivers1 Functions(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX487 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 0.4mA |
| Data Rate | 250kbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Interface Standard | EIA-422; EIA-485 |
| Receive Delay-Max | 2000 ns |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 1.5 V |
| High Level Input Current-Max | 0.00025A |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
MAX487CPA Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-DIP (0.300, 7.62mm) package.The package of this receiver is Tube.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Through Hole-type PCB or development board, you can install this wide receiver.A power supply of 4.75V~5.25V is used by this differential driver.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.In this package, you will find 8 market-standard pinouts for this transceiver.Since the part number MAX487 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.It provided a 1-bit resolution capability with this ic receiver.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.There is a subcategory called Line Driver or Receivers for this rf transceiver module.This driver IC is designed to operate from a 5V power supply.A 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER function is also included in this optical transceiver module, which improves stability and accuracy of signal management.Input current should not exceed 0.4mA at the VCC pin of the ic receiver.
MAX487CPA Features
Tube package
8 pin count
5V power supply
MAX487CPA Applications
There are a lot of Maxim Integrated MAX487CPA Drivers/Receivers/Transceivers applications.
- Desktop radio
- transmission relay
- Wireless network systems
- Wireless 3D game
- Wireless HD Photography
- Aircraft navigation
- Laser diode bonding
- IP cameras
- Wireless projection application for business talks
- Broadcast application
