MAX4521EPE+

MAX4521EPE+ Overview

Packed in DIP, the electronic component is convenient for shipping overseas. The total number of terminations is 16. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. It has an internal resistance of 100Ohm. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. For this multiplexer to operate, 1μA current would be sufficient. Despite this switch device's dual supply capability, its voltage should not exceed 6V. A dual power supply should have at least 2V voltage attached. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Don't forget the additional features of this electronic part, such as: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY. During operation, the multiplexer should not be exposed to a temperature above 85°C. 4-bits are supported.

MAX4521EPE+ Features

1 Channels
1μA Supply Current
Additional Features: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
4-Bit

MAX4521EPE+ Applications

There are a lot of Maxim Integrated MAX4521EPE+ Analog Switches & Multiplexers ICs applications.

• PDH Multiplexers
• T1/E1 Terminals
• Communications systems
• Imaging
• Precision data acquisition
• Multiplexers
• Data Acquisition Systems
• Intelligent PBX
• Power routing
• Audio and video routing