Products
Manufacturer
RFQ
NEWS
ContactMAX44251AUA+T
96mA per Channel 200pA 133 dB Instrumentational OP Amps 2.7V~20V ±1.35V~10V MAX44251 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Manufacturer: Maxim Integrated
- NO: 503-MAX44251AUA+T
- Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet:
- Stock: 4607
- Description: 96mA per Channel 200pA 133 dB Instrumentational OP Amps 2.7V~20V ±1.35V~10V MAX44251 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX44251 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 1.15mA |
| Nominal Supply Current | 1.15mA |
| Output Current | 58mA |
| Slew Rate | 8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 133 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~20V ±1.35V~10V |
| Output Current per Channel | 96mA |
| Input Offset Voltage (Vos) | 3μV |
| Gain Bandwidth Product | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 154dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0013μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX44251AUA+T Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. This is a Zero-Drift type op amp. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. It is important to remember that this op amp should be operated at a voltage of 3.3V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. The input offset voltage is 3μV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 1.15mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 154dB. There are 2 circuits on op amps. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
MAX44251AUA+T Features
supply voltage of 3.3V
154dB voltage gain
Output Type: Rail-to-Rail
MAX44251AUA+T Applications
There are a lot of Maxim Integrated MAX44251AUA+T Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Television
- Signal transformation
- Medical imaging
- Multimedia playback equipment
- High/low-pass filter circuit
- Polarized electrodes
- Video conversion and routing
- Information processing
- Integrator circuits
