Products
Manufacturer
RFQ
NEWS
ContactMAX326C/D
1μs, 500ns SPST - NC 3.5kOhm UPPER Analog Switches BREAK-BEFORE-MAKE 15 Pins 10pA 15V Die
- Manufacturer: Maxim Integrated
- NO: 503-MAX326C/D
- Package: Die
- Datasheet:
- Stock: 9638
- Description: 1μs, 500ns SPST - NC 3.5kOhm UPPER Analog Switches BREAK-BEFORE-MAKE 15 Pins 10pA 15V Die(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | Die |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | UPPER |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Output | SEPARATE OUTPUT |
| Pin Count | 15 |
| JESD-30 Code | R-XUUC-N15 |
| Power Supplies | +-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 3.5kOhm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 10pA |
| Channel Capacitance (CS(off), CD(off)) | 1.7pF 1.7pF |
| On-state Resistance Match-Nom | 175Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 1μs, 500ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 175 Ω (Typ) |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 500ns |
| Normal Position | NC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX326C/D Overview
Shipping overseas is convenient due to the electrical component's packing in Die. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to 0°C~70°C. In total, 15 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 15 series. A SPST - NC switching circuit is used to build these analog multiplexers. There are 4 circuits in this multiplexer. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 30V. There should be 10V voltage fed to the electrical part below 10V. Despite this switch device's dual supply capability, its voltage should not exceed 18V. A dual power supply should have at least 4.5V voltage attached. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX326C/D Features
1 Channels
Switch Circuit: SPST - NC
MAX326C/D Applications
There are a lot of Maxim Integrated MAX326C/D Analog Switches & Multiplexers ICs applications.
- Ultrasound
- SONET/SDH ADM
- Communications systems
- Multiplexers
- Automotive applications
- Data Acquisition Systems
- PCMCIA cards
- PBX interfaces
- Communication systems
- DSLAMs
