MAX31091AUA/V+T172

MAX31091AUA/V+T172 Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, there is an embedded clock generator. There are a total of 8 terminations in this file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. This clock generator receives its inputs from Clock, which is designed to be the clock source. A total of 1 circuits are implemented to access the full performance of the electrical part. 1.7MHz is the maximal value for normal operation. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.6V. The supply voltage (Vsup) should be kept above 3V for normal operation. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. As determined by the test statistics, the ambient temperature should be set to -40°C~125°C. According to the base part number MAX31091, its related parts can be found. There is a 8 pin that is available on the digital clock generator. Automotive, AEC-Q100, EconOscillator? series electronic parts are used in this part. ICs such as this can be classified as ANALOG CIRCUIT-RF synthesizers since they are analog.

MAX31091AUA/V+T172 Features

Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V

MAX31091AUA/V+T172 Applications

There are a lot of Maxim Integrated MAX31091AUA/V+T172 Clock Generators applications.

• Signal generator
• MRI
• Integrated phase noise in aerospace systems
• Satellite receivers
• High-speed optical transport network (OTN)
• Threshold extension
• Electronic equipment
• Small signal recovery
• Signal demodulation
• Motor speed controls