M48T35-70PC1

M48T35-70PC1 Overview

28-DIP Module (0.600, 15.24mm) is where you'll find real time clocks.In this case, time clock is packaged in the way of Tube.The supply voltage of this electrical RTC is 4.75V~5.5V.Electrical real time clocks of this type are Clock/Calendar.This real time clock (RTC) is mounted in the way of Through Hole.Ideally, the operating temperature should be set to 0°C~70°C.When a command are executed, electronic time clocks are possible to maintain Leap Year in order to maintain the current state.It is possible to terminate transmission lines with 28 terminations, which means that the RTC module terminating the line matches its characteristic impedance.In the case of this RTC real time clock, there is 5V voltage supplied to it.The RTCs are equipped with the necessary features due to its 28 pins.As far as the family are concerned, RTCs are part of M48T35.Under the Timers or RTCs subcategory, the RTCs belongs.It is possible to store data and programs on the real time analog clocks with a memory size of 32MB.In this case, the RTC module is mounted in the way of Through Hole.As a power supply for the real time clock, a value of 5V is used.A total of 28 pins are attached to this real time clock.Maintaining a voltage of 5V will result in high efficiency.In the series Timekeeper?, it belongs to the real-time clock category.There is 32.768kHz frequency that can be achieved.

M48T35-70PC1 Features

28-DIP Module (0.600, 15.24mm) package
28 terminations
28 pin count
5V power supplies
Be maintained at 5V for high efficiency.
Timekeeper? series

M48T35-70PC1 Applications

There are a lot of STMicroelectronics M48T35-70PC1 Real Time Clocks applications.

• Time keeping application
• GPS
• Utility Meters
• Copier
• Printers
• Industrial
• Digital voice recorders
• Hand-Held Devices
• Bridges
• Low standby power applications