Products
Manufacturer
RFQ
NEWS
ContactLTC6241CS8#TRPBF
2 Channels 30mA per Channel 0.2pA 80 dB Instrumentational OP Amps 2.8V~6V LTC6241 8-SOIC (0.154, 3.90mm Width)
- Manufacturer: Linear Technology / Analog Devices
- NO: 471-LTC6241CS8#TRPBF
- Package: 8-SOIC (0.154, 3.90mm Width)
- Datasheet:
- Stock: 8506
- Description: 2 Channels 30mA per Channel 0.2pA 80 dB Instrumentational OP Amps 2.8V~6V LTC6241 8-SOIC (0.154, 3.90mm Width)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Base Part Number | LTC6241 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.8V |
| Operating Supply Current | 1.8mA |
| Current - Supply | 1.8mA |
| Slew Rate | 10V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.8V~6V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 40μV |
| Gain Bandwidth Product | 18MHz |
| Voltage Gain | 124.08dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Voltage - Input Offset | 40μV |
| Current - Output / Channel | 30mA |
| Nominal Gain Bandwidth Product | 18MHz |
| RoHS Status | ROHS3 Compliant |
LTC6241CS8#TRPBF Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 40μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges 0°C~70°C. An 1.8mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. In total, there are 2 circuits on this buffer amplifier. On the buffer amps, there are 2 channels that can be used. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The temperature should not be lower than 0°C for operational amplifier ics to operate. A temperature greater than 70°C should not be used for the operation of this instrumentation amplifier. A total of 2 elements are present in this linear amplifier. As a recommendation, this electronic component should be used with a power supply that can deliver 1.8mA. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 6V, and this is an excellent feature. To keep the buffer amps' supply voltage higher than 2.8V.
LTC6241CS8#TRPBF Features
124.08dB voltage gain
Output Type: Rail-to-Rail
LTC6241CS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC6241CS8#TRPBF Instrumentational OP Amps applications.
- Computer workstations
- Measurements of Wheatstone bridge
- E-book readers
- Home audio systems
- Portable electronic products powered by batteries
- Gaming industry
- Navigation
- High/low-pass filter circuit
- High speed sample
- Weak signal detection
