Products
Manufacturer
RFQ
NEWS
ContactLMV851MG/NOPB
1 Channels 65mA per Channel 0.1pA 77 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.75V LMV851 5 Pins 5-TSSOP, SC-70-5, SOT-353
- Manufacturer: Texas Instruments
- NO: 815-LMV851MG/NOPB
- Package: 5-TSSOP, SC-70-5, SOT-353
- Datasheet:
- Stock: 976
- Description: 1 Channels 65mA per Channel 0.1pA 77 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.75V LMV851 5 Pins 5-TSSOP, SC-70-5, SOT-353(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | LMV851 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 430μA |
| Nominal Supply Current | 400μA |
| Output Current | 30mA |
| Slew Rate | 4.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 0.1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 8MHz |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 260μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
LMV851MG/NOPB Overview
There is a 5-TSSOP, SC-70-5, SOT-353 case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 5 terminations have been reported in the past few weeks. Linear amplifier has a total of 5 pins. Please take in mind that op amp should be run at 3.3V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 5 pins. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . An 430μA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 120dB. On the buffer amps, there are 1 channels that can be used. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. This linear amplifier pack is based on the TR axis.
LMV851MG/NOPB Features
5 Pins
supply voltage of 3.3V
120dB voltage gain
Output Type: Rail-to-Rail
LMV851MG/NOPB Applications
There are a lot of Texas Instruments LMV851MG/NOPB Instrumentational OP Amps applications.
- Portable docking station
- Comparator
- Radar
- Measurements of Wheatstone bridge
- Industrial control system
- Professional videography
- Oscilloscopes
- Proportional operation circuits
- Test and measurement instruments
- High/low-pass filter circuit
