Products
Manufacturer
RFQ
NEWS
ContactLMV710M5/NOPB
1 Channels 40mA per Channel 4pA 50 dB Instrumentational OP Amps 3V 2.7V~5.5V LMV710 5 Pins SC-74A, SOT-753
- Manufacturer: Texas Instruments
- NO: 815-LMV710M5/NOPB
- Package: SC-74A, SOT-753
- Datasheet:
- Stock: 8156
- Description: 1 Channels 40mA per Channel 4pA 50 dB Instrumentational OP Amps 3V 2.7V~5.5V LMV710 5 Pins SC-74A, SOT-753(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV710 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 1.17mA |
| Nominal Supply Current | 1.17mA |
| Output Current | 35mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 123dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV710M5/NOPB Overview
It is packaged in an SC-74A, SOT-753-case that protects the operational amplifiers from damage. General Purpose-type instrumentation amplifiers are used in this application. A Cut Tape (CT) case is used for delivering the op amp. There have been a total of 5 terminations over the past year. In this case, there are 5 pins on the board. This linear amplifier should be powered by an 2.7V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 3mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 1.17mA supply current, this operational amplifier ics can be operated. 123dB should remain the voltage gain. On the buffer amps, there are 1 channels that can be used. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 3V. For packing the buffer amplifier, the TR-axis is adopted.
LMV710M5/NOPB Features
5 Pins
supply voltage of 2.7V
123dB voltage gain
Output Type: Rail-to-Rail
LMV710M5/NOPB Applications
There are a lot of Texas Instruments LMV710M5/NOPB Instrumentational OP Amps applications.
- Band-pass filter
- ECG equipment
- Hand-held batteries
- Precision measurement
- pH (acidity)
- Communication device
- Ultrasound transducers
- Industrial control system
- single/dual op amp sum and difference circuits
- PDA
