LM2904VN

2 Channels 250nA 50 dB Instrumentational OP Amps 0.5μA 16V 8 Pins PDIP


  • Manufacturer: ON Semiconductor
  • NO: 598-LM2904VN
  • Package: PDIP
  • Datasheet: -
  • Stock: 6898
  • Description: 2 Channels 250nA 50 dB Instrumentational OP Amps 0.5μA 16V 8 Pins PDIP(Kg)

Quantity:


  • Delivery: Delivery
  • Payment: payment

In Stock

Please send RFQ , we will respond immediately.

authentication (1) authentication (2) authentication (3) authentication (4) authentication (5) authentication (6) authentication (7) authentication (8) authentication (9)

Purchase & Inquiry

Transport

User guide

Purchase

You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.transport

SPECIFICATIONS

Parameters
Lifecycle Status OBSOLETE (Last Updated: 1 week ago)
Package / Case PDIP
Surface Mount NO
Number of Pins 8
Published 2005
JESD-609 Code e0
Pbfree Code no
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Subcategory Operational Amplifier
Packing Method RAIL
Technology BIPOLAR
Terminal Position DUAL
Terminal Form THROUGH-HOLE
Peak Reflow Temperature (Cel) 240
Number of Functions 2
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 8
Operating Supply Voltage 16V
Temperature Grade AUTOMOTIVE
Number of Channels 2
Max Supply Voltage 32V
Min Supply Voltage 3V
Nominal Supply Current 1.2mA
Current - Output 40mA
Slew Rate 0.6 V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio 50 dB
Current - Input Bias 250nA
Input Offset Voltage (Vos) 7mV
Gain Bandwidth Product 1MHz
Unity Gain BW-Nom 1000 kHz
Voltage Gain 100dB
Average Bias Current-Max (IIB) 0.5μA
Low-Offset NO
Frequency Compensation YES
Max Dual Supply Voltage 16V
Min Dual Supply Voltage 1.5V
Height Seated (Max) 4.45mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead

LM2904VN Overview


The linear amplifier is packaged in a PDIP case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. The number of terminations approaches 8. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 7mV. Op amp is a member of the 100dB's 100dB family. 2 channels are available on the instrumentation amplifier. This instrumentation amplifier cannot operate below -40°C degrees Celsius. No temperature greater than 125°C should be used. The operating supply voltage of instrumentation amplifier is rated 16V voltage. It is used RAIL to pack the op amps. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 32V, and this is an excellent feature. A voltage of 3V or higher is recommended for the linear amplifier's supply voltage. As a general rule, you should conduct this electronic component under dual supply voltages of 16V volts.

LM2904VN Features


8 Pins
supply voltage of 5V
100dB voltage gain

LM2904VN Applications


There are a lot of ON Semiconductor LM2904VN Instrumentational OP Amps applications.

  • Biopotential
  • Logarithmic operation circuits
  • Scintillation detectors
  • Television broadcasting equipment
  • Communication
  • Video data acquisition
  • Car stereo
  • Communication device
  • Thermocouples
  • Displayers for aircraft and air transportation control systems

In Stock

Please send RFQ , we will respond immediately.