LM25011MY/NOPB

LM25011MY/NOPB Overview

For optimal performance, this voltage regulator makes use of the Tape & Reel (TR) package. A voltage regulator consists of 10 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. For space-saving purposes, this voltage regulator is available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. There are 1 output configured on the voltage regulator. DC DC switching regulators like this one generate Adjustable outputs on their output pins to handle power management. The voltage regulator 12v fits the Surface Mount mounting hole. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. Up to 2MHz is the switching frequency of this DC-DC switching regulator. Voltage regulators like this one can operate at least with 6V as the dc to dc voltage regulator's minimum input voltage. There is a voltage regulator maximum input voltage of 42V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. As a result of the DC DC switching regulator design, it is designed to provide an input voltage of 12V for the purposes of operation. There is a subcategory called Switching Regulators or Controllers that includes this voltage regulator. DC/DC regulators such as this one belong to the LM25011 family of products. The adjusting voltage regulator's output voltage is maintained at 40V. 10 pins are used for switching regulator operation. There should be at least a 2.51V volt output voltage for this switching regulator in order to make it work properly. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 2A A. The maximum output voltage of this regulator voltage is 40V. 42V is the supply voltage for this DC-DC switching regulator. An external factor does not affect Harley's voltage regulator's ability to consume 1.2mA A of quiescent current. The switching regulator can be operated with a 12VV power supply and is suitable for use with that voltage.

The LM25011 constant-on buck switching regulator has all the necessary features to implement a low-cost, high-efficiency buck bias regulator capable of delivering 2A load current. This high-voltage regulator contains an N-channel buck switch, a startup regulator, current limit detection, and internal ripple control. The constant-on regulation principle eliminates the need for loop compensation, resulting in fast load transient response and simplified circuit implementation. The operating frequency does not vary with line and load changes. Adjustable valley current limit detection facilitates a smooth transition from constant voltage mode to constant current mode when the current limit is reached, eliminating the need for a foldback current limit. The PGD output will indicate when the output voltage has risen to within 5% of the expected regulation value. Additional features include low output ripple voltage, input voltage Undervoltage lockout, adjustable soft-start timing, thermal shutdown, gate drive precharge, gate drive Undervoltage lockout, and maximum duty cycle limit.

The LM25011A has a shorter minimum off-time than the LM25011, enabling higher operating frequencies at low input voltages.

The LM25011 constant-on buck switching regulator has all the necessary features to implement a low-cost, high-efficiency buck bias regulator capable of delivering 2A load current. This high-voltage regulator contains an N-channel buck switch, a startup regulator, current limit detection, and internal ripple control. The constant-on regulation principle eliminates the need for loop compensation, resulting in fast load transient response and simplified circuit implementation. The operating frequency does not vary with line and load changes. Adjustable valley current limit detection facilitates a smooth transition from constant voltage mode to the constant current mode when the current limit is reached, eliminating the need for a foldback current limit. The PGD output will indicate when the output voltage has risen to within 5% of the expected regulation value. Additional features include low output ripple voltage, input voltage Undervoltage lockout, adjustable soft-start timing, thermal shutdown, gate drive precharge, gate drive under-voltage lockout, and maximum duty cycle limit.

The LM25011A has a shorter minimum off-time than the LM25011, enabling higher operating frequencies at low input voltages.

LM25011MY/NOPB Features

1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 42V

LM25011MY/NOPB Applications

There are a lot of Texas Instruments LM25011MY/NOPB Voltage Regulators applications.

• Planers
• Computer application technology
• Thermal power
• Imported equipment
• Product testing
• Computer-related products
• Power supplies of electronic gadgets
• Terrestrial set-top boxes
• ATMs
• Medical equipment