Products
Manufacturer
RFQ
NEWS
ContactLF353N/NOPB
2 Channels 50pA 70 dB Instrumentational OP Amps 18V 10V~36V ±5V~18V LF353 8 Pins 8-DIP (0.300, 7.62mm)
- Manufacturer: Texas Instruments
- NO: 815-LF353N/NOPB
- Package: 8-DIP (0.300, 7.62mm)
- Datasheet:
- Stock: 5359
- Description: 2 Channels 50pA 70 dB Instrumentational OP Amps 18V 10V~36V ±5V~18V LF353 8 Pins 8-DIP (0.300, 7.62mm)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 113.398093g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | BI-FET II™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LF353 |
| Pin Count | 8 |
| Max Output Current | 20mA |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 3.6mA |
| Nominal Supply Current | 3.6mA |
| Output Current | 20mA |
| Max Supply Current | 6.5mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 5mV |
| Settling Time | 2 μs |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 0.004μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LF353N/NOPB Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. This is a J-FET type op amp. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 10mV. This electrical part should be mounted using type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . This op amp can operate from a supply current at 3.6mA. It is recommended to keep the voltage gain at 100dB at all times. Op amp ic has 2 channels. The operating supply voltage of instrumentation amplifier is rated 18V voltage. BI-FET II? corresponds to linear amplifier's series.
LF353N/NOPB Features
8 Pins
supply voltage of 15V
100dB voltage gain
LF353N/NOPB Applications
There are a lot of Texas Instruments LF353N/NOPB Instrumentational OP Amps applications.
- Signal transformation
- pH (acidity)
- Biopotential
- Automation control systems
- Blood pressure sensors
- single/dual op amp sum and difference circuits
- Weighing systems
- Oscilloscopes
- MP3
- Laptop
