+86 17610397725 info@chipsmt.com
English
ISL5121CBZ-T
  • ISL5121CBZ-T

ISL5121CBZ-T

DUAL Analog Switches 3.3V SOIC


  • Manufacturer: Intersil (Renesas Electronics America)
  • NO: 391-ISL5121CBZ-T
  • Package: SOIC
  • Datasheet: pdf
  • Stock: 5927
  • Description: DUAL Analog Switches 3.3V SOIC(Kg)

Quantity:


  • Delivery: Delivery
  • Payment: payment

In Stock

Please send RFQ , we will respond immediately.

authentication (1) authentication (2) authentication (3) authentication (4) authentication (5) authentication (6) authentication (7) authentication (8) authentication (9)

Purchase & Inquiry

Transport

User guide

Purchase

You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.transport

SPECIFICATIONS

Parameters
Turn On Delay Time 35 ns
Supply Type Single
Turn-Off Delay Time 30 ns
Off-state Isolation-Nom 76 dB
On-state Resistance Match-Nom 1Ohm
Normal Position NC
Height Seated (Max) 1.75mm
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case SOIC
Number of Pins 8
Published 2001
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 8
Resistance 30Ohm
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Subcategory Multiplexer or Switches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) 40
Output SEPARATE OUTPUT
Temperature Grade COMMERCIAL
Number of Channels 1
Max Supply Voltage 12V
Min Supply Voltage 2.7V
Operating Supply Current 100pA
Max Supply Current 1μA
Number of Bits 2
Throw Configuration SPST

ISL5121CBZ-T Overview


Due to its SOIC packaging, the electronic part is convenient for international shipping. In total, there have been 8 terminations. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 3.3V voltage supply. The internal resistance of this digital multiplexer is 30Ohm. For functions related to 8 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 2.7V. An operating current of 100pA would be sufficient for this switch device. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. During operation, the multiplexer should not be exposed to a temperature above 70°C. Its conductivity is 2-bit.

ISL5121CBZ-T Features


1 Channels
100pA Supply Current
2-Bit

ISL5121CBZ-T Applications


There are a lot of Intersil (Renesas Electronics America) ISL5121CBZ-T Analog Switches & Multiplexers ICs applications.

  • Industrial and process control systems
  • SDH
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
  • Audio signal routing
  • Remote wireless modules
  • Audio and video routing
  • Digital Cross-Connects
  • Data switching
  • PCMCIA cards
  • PBXs
Hit enter to search or ESC to close

In Stock

Please send RFQ , we will respond immediately.

RFQ List (0 Items)