Products
Manufacturer
RFQ
NEWS
ContactISL43741IRZ-T
QUAD Analog Switches BREAK-BEFORE-MAKE 20 Pins 5V QFN EP
- Manufacturer: Intersil (Renesas Electronics America)
- NO: 391-ISL43741IRZ-T
- Package: QFN EP
- Datasheet:
- Stock: 3738
- Description: QUAD Analog Switches BREAK-BEFORE-MAKE 20 Pins 5V QFN EP(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Turn On Delay Time | 100 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.007mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| Off-state Isolation-Nom | 92 dB |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 35ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | QFN EP |
| Number of Pins | 20 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 20 |
| Resistance | 45Ohm |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 20 |
| Operating Supply Voltage | 9V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 7μA |
| Throw Configuration | 4PST |
| Propagation Delay | 60 ns |
ISL43741IRZ-T Overview
Due to its QFN EP packaging, the electronic part is convenient for international shipping. Total terminations are 20. As a result of its 2 channels, this electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. An injection of 20 pins is performed into the body of the electrical component. This digital multiplexer has 45Ohm internal resistance. Please refer to the datasheets for 20 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 12V should not normally be supplied to the switches. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 2V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 7μA current. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. With dual power supplies, you should attach at least 2V. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. The electrical part can be operated at 9V voltage levels. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer.
ISL43741IRZ-T Features
2 Channels
7μA Supply Current
ISL43741IRZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43741IRZ-T Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Battery-powered systems
- Remote wireless modules
- Data switching
- Power routing
- Fiber In The Loop (FITL)
- Cellular phones
- Residential Gateways, Home Gateway/Router
- Microprocessor Controlled Analog Systems
- Fault Tolerant Systems
