Products
Manufacturer
RFQ
NEWS
ContactISL43145IVZ
Analog Switches BREAK-BEFORE-MAKE 16 Pins 5V TSSOP
- Manufacturer: Intersil (Renesas Electronics America)
- NO: 391-ISL43145IVZ
- Package: TSSOP
- Datasheet:
- Stock: 3582
- Description: Analog Switches BREAK-BEFORE-MAKE 16 Pins 5V TSSOP(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 20Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 10nA |
| Max Supply Current | 1μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Turn On Delay Time | 65 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| Dual Supply Voltage | 5V |
| Off-state Isolation-Nom | 71 dB |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL43145IVZ Overview
As the electronic part is packed in TSSOP, international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Bulk. A total of 16 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. An switch multiplexer with 20Ohm internal resistance has a value of 20Ohm. Please refer to the datasheets for 16 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 12V should not normally be supplied to the switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. The analogue multiplexer could operate on 10nA current. Putting voltage greater than 1μA on the multiplexer may cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. You should attach at least 2V voltage if you are using dual power supply. There are SEPARATE OUTPUT outputs on this analog switch ic. Don't miss this electronic component's additional features, such as: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY. During operation, the multiplexer should not be exposed to a temperature above 85°C. 4-bits are supported.
ISL43145IVZ Features
1 Channels
10nA Supply Current
Additional Features: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
4-Bit
ISL43145IVZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL43145IVZ Analog Switches & Multiplexers ICs applications.
- PDH Multiplexers
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Fiber to the Home
- Cable PC
- Routers
- CSU
- Fault Tolerant Systems
- SONET/SDH ADM
- Multi-Line E1 Interface Cards
