Products
Manufacturer
RFQ
NEWS
ContactISL43144IRZ-T
QUAD Analog Switches BREAK-BEFORE-MAKE 5V VQFN
- Manufacturer: Intersil (Renesas Electronics America)
- NO: 391-ISL43144IRZ-T
- Package: VQFN
- Datasheet:
- Stock: 1319
- Description: QUAD Analog Switches BREAK-BEFORE-MAKE 5V VQFN(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Min Dual Supply Voltage | 2V |
| Dual Supply Voltage | 5V |
| Off-state Isolation-Nom | 71 dB |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | VQFN |
| Number of Pins | 16 |
| Packaging | Tape & Reel |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Resistance | 20Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Output | SEPARATE OUTPUT |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 10nA |
| Max Supply Current | 1μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Turn On Delay Time | 65 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 6V |
ISL43144IRZ-T Overview
The electronic component is convenient to ship overseas because it is packed in a VQFN. The advanced packaging method Tape & Reel provides high reliability. In total, there are 16 terminations. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. Analog switches have 20Ohm internal resistance. The datasheets for the 16 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 2V. For this multiplexer to operate, 10nA current would be sufficient. A voltage higher than 1μA may cause damage to the switch multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. If you are using dual power supplies, you should attach at least 2V. There are SEPARATE OUTPUT outputs on this analog switch ic. There is also ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY to look out for in this electronic part. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. Its conductivity is 4-bit.
ISL43144IRZ-T Features
1 Channels
10nA Supply Current
Additional Features: ALSO OPERATE WITH 2V TO 12V SINGLE SUPPLY
4-Bit
ISL43144IRZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43144IRZ-T Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- PBX interfaces
- Cable Modem
- Communication systems
- ISDN NT1/TA
- Cable PC
- Automatic test equipment
- SONET
- T1/E1 Terminals
- Digital access cross connects
