Products
Manufacturer
RFQ
NEWS
ContactINA333AIDRGT
40mA per Channel 70pA 100 dB Instrumentational OP Amps 0.0002μA 1.8V~5.5V ±0.9V~2.75V INA333 8 Pins 8-WFDFN Exposed Pad
- Manufacturer: Texas Instruments
- NO: 815-INA333AIDRGT
- Package: 8-WFDFN Exposed Pad
- Datasheet:
- Stock: 9956
- Description: 40mA per Channel 70pA 100 dB Instrumentational OP Amps 0.0002μA 1.8V~5.5V ±0.9V~2.75V INA333 8 Pins 8-WFDFN Exposed Pad(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 10.886217mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Resistance | 100GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | INA333 |
| Pin Count | 8 |
| Output Voltage | 1.75V |
| Output Type | Rail-to-Rail |
| Power Supplies | 2/5V |
| Number of Circuits | 1 |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Quiescent Current | 50μA |
| Slew Rate | 0.16V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 70pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 150 kHz |
| Gain Bandwidth Product | 150 kHz |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 10μV |
| -3db Bandwidth | 0.15MHz |
| Input Offset Current-Max (IIO) | 0.0002μA |
| Voltage Gain-Min | 1 |
| Number of Amplifiers | 3 |
| Voltage Gain-Nom | 10 |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 730μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA333AIDRGT Overview
It is packaged in an 8-WFDFN Exposed Pad-case that protects the operational amplifiers from damage. An op amp of this type is a Instrumentation-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 25μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 50μA . This op amp contains 1 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. An buffer amplifier is packed in a TR-shape according to the design. There is an 50μA quiescent current running through op amp ic. There is a minimum voltage gain of 1 that this buffer op amp is capable of conducting. It is important to keep the resistance within the 100GOhm range of the linear amplifier. On the linear amplifier, there are 3 amplifiers.
INA333AIDRGT Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 100GOhm
INA333AIDRGT Applications
There are a lot of Texas Instruments INA333AIDRGT Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Industrial applications including automation
- E-book readers
- Wireless base stations
- Weak signal detection
- Weighing systems
- Power transmission
- Logarithmic operation circuits
- Active probe
- ECG equipment
