Products
Manufacturer
RFQ
NEWS
ContactINA111AP
1 Channels 30mA per Channel 2pA 75 dB Instrumentational OP Amps 0.00002μA ±6V~18V INA111 8 Pins 8-DIP (0.300, 7.62mm)
- Manufacturer: Texas Instruments
- NO: 815-INA111AP
- Package: 8-DIP (0.300, 7.62mm)
- Datasheet:
- Stock: 1516
- Description: 1 Channels 30mA per Channel 2pA 75 dB Instrumentational OP Amps 0.00002μA ±6V~18V INA111 8 Pins 8-DIP (0.300, 7.62mm)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Voltage - Input Offset | 200μV |
| -3db Bandwidth | 2MHz |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.04% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 528.605208mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10 TΩ |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | INA111 |
| Pin Count | 8 |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 3.3mA |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 4.5mA |
| Quiescent Current | 3.3mA |
| Slew Rate | 17V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | ±6V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 2MHz |
| Gain Bandwidth Product | 2MHz |
INA111AP Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. A Instrumentation-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 8-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. This electronic part is recommended for mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. As long as the supply current of the chip does not exceed 3.3mA, this op amp ic can operate. You should keep the voltage gain at 80dB for the time being. The op amp ic has 1 channels on it. It is possible to count 3 elements on this buffer amplifier. There is an 3.3mA quiescent current running through op amp ic. In order for the op amp resistance to remain within the 10 TΩ range, the op amp should be tested.
INA111AP Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10 TΩ
INA111AP Applications
There are a lot of Texas Instruments INA111AP Instrumentational OP Amps applications.
- Image computer boards
- Radar
- Portable electronic products powered by batteries
- Voltage regulation circuit
- Test equipment
- Ultrasound transducers
- Portable media players
- Proportional counter tubes
- Video conversion and routing
- Oscilloscopes
